国家标准网 - 在线下载

ISO 21216 2012 Intelligent transport systems — Communication access for land mobiles (CALM) — Millimetre wave air interface.pdf
ISO 21254-2 2011 Lasers and laser-related equipment — Test methods for laser-induced damage threshold — Part 2 Threshold determination.pdf
ISO 21338 2010 Water quality — Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test).pdf
ISO 21457 2010 Petroleum, petrochemical and natural gas industries — Materials selection and corrosion control for oil and gas production systems.pdf
ISO 21461 2012 Rubber — Determination of the aromaticity of oil in vulcanized rubber compounds.pdf
ISO 21507 2010 Earth-moving machinery — Performance requirements for non-metallic fuel tanks.pdf
ISO 21581 2010 Timber structures - Static and cyclic lateral load test methods for shear walls.pdf
ISO 21601 2013 Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion cracks detected in service.pdf
ISO 21608 2012 Corrosion of metals and alloys — Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials.pdf
ISO 21667 2010 Health informatics — Health indicators conceptual framework.pdf
ISO 21672-1 2012 Dentistry — Periodontal probes — Part 1 General requirements.pdf
ISO 21672-2 2012 Dentistry — Periodontal probes — Part 2 Designation.pdf
ISO 21927-10 2011 Smoke and heat control systems — Part 10 Specification for power output devices.pdf
ISO 21927-9 2012 Smoke and heat control systems — Part 9 Specification for control equipment.pdf
ISO 21929-1 2011 Sustainability in building construction — Sustainability indicators — Part 1 Framework for the development of indicators and a core set of indicators for buildings.pdf
ISO 21940-13 2012 Mechanical vibration — Rotor balancing — Part 13 Criteria and safeguards for the in-situ balancing of medium and large rotors.pdf
ISO 21940-14 2012 Mechanical vibration — Rotor balancing — Part 14 Procedures for assessing balance errors.pdf
ISO 21940-23 2012 Mechanical vibration — Rotor balancing — Part 23 Enclosures and other protective measures for the measuring station of balancing machines.pdf
ISO 21940-32 2012 Mechanical vibration — Rotor balancing — Part 32 Shaft and fitment key convention.pdf
ISO 21952 2012 Welding consumables — Wire electrodes, wires, rods and deposits.pdf
ISO 22033 2011 Nickel alloys — Determination of niobium — Inductively coupled plasma atomic emission spectrometric method.pdf
ISO 22068 2012 Sintered-metal injection-moulded materials — Specifications.pdf
ISO 22072 2011 Aerospace — Electrohydrostatic actuator (EHA) — Characteristics to be defined in procurement specifications.pdf
ISO 22118 2011 Microbiology of food and animal feeding stuffs — Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens — Performance characteristics.pdf
ISO 22158 2011 Input output protocols and electronic interfaces for water meters — Requirements.pdf
ISO 22196 2011 Measurement of antibacterial activity on plastics and other non-porous.pdf
ISO 22262-1 2012 Air quality — Bulk materials — Part 1 Sampling and qualitative determination of asbestos in commercial bulk materials.pdf
ISO 22274 2013 Systems to manage terminology, knowledge and content — Concept-related aspects for developing and internationalizing classification systems.pdf
ISO 22282-1 2012 Geotechnical investigation and testing — Geohydraulic testing — Part 1 General rules.pdf
ISO 22282-2 2012 Geotechnical investigation and testing — Geohydraulic testing — Part 2 Water permeability tests in a borehole using open systems.pdf
ISO 22282-3 2012 Geotechnical investigation and testing — Geohydraulic testing — Part 3 Water pressure tests in rock.pdf
ISO 22282-5 2012 Geotechnical investigation and testing — Geohydraulic testing — Part 5 Infiltrometer tests.pdf
ISO 22282-6 2012 Geotechnical investigation and testing — Geohydraulic testing — Part 6 Water permeability tests in a borehole using closed systems.pdf
ISO 2230 2002 Rubber products — Guidelines for storage.pdf
ISO 22311 2012 Societal security — Video-surveillance — Export interoperability.pdf
ISO 22448 2010 Earth-moving machinery — Anti-theft systems — Classification and performance.pdf
ISO 22452 2011 Timber structures — Structural insulated panel walls — Test methods.pdf
ISO 22476-7 2012 Geotechnical investigation and testing — Field testing — Part 7 Borehole.pdf
ISO 225 2010 Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions.pdf
ISO 22514-6 2013 Statistical methods in process management — Capability and performance — Part 6 Process capability statistics for characteristics following a multivariate normal distribution.pdf
ISO 22538-5 2010 Space systems — Oxygen safety — Part 5 Operational and emergency procedures.pdf
ISO 22538-6 2010 Space systems — Oxygen safety — Part 6 Facility planning and implementation.pdf
ISO 22628 2002 Road vehicles — Recyclability and recoverability — Calculation method.pdf
ISO 22641 2012 Space data and information transfer systems — TM (telemetry) synchronization and channel coding.pdf
ISO 22654 2002 Footwear — Test methods for outsoles — Tensile strength and elongation.pdf
ISO 22742 2010 Packaging — Linear bar code and two-dimensional symbols for product packaging.pdf
ISO 22810 2010 Horology — Water-resistant watches.pdf
ISO 22846-2 2012 Personal equipment for protection against falls — Rope access systems — Part 2 Code of practice.pdf
ISO 22891 2013 Paper — Determination of transmittance by diffuse reflectance measurement.pdf
ISO 22901-2 2011 Road vehicles — Open diagnostic data exchange (ODX) — Part 2 Emissions-related diagnostic data.pdf
ISO 23146 2012 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for fracture toughness of monolithic ceramics — Single-edge V-notch beam (SEVNB) method.pdf
ISO 23160 2011 Watch cases and accessories — Tests of the resistance to wear, scratching and impacts.pdf
ISO 23409 2011 Male condoms — Requirements and test methods for condoms made from synthetic materials.pdf
ISO 23461 2010 Space systems — Programme management — Non-conformance control.pdf
ISO 23480 2013 Tools for pressing — Sliding plates.pdf
ISO 2351-2 2002 Assembly tools for screws and nuts — Machine-operated screwdriver bits — Part 2 Screwdriver bits for cross-recessed head screws.pdf
ISO 23519 2010 Sintered metal materials, excluding hardmetals — Measurement of surface roughness.pdf
ISO 23559 2011 Plastics — Film and sheeting — Guidance on the testing of thermoplastic film.pdf
ISO 23584-2 2012 Optics and photonics — Specification of reference dictionary — Part 2 Classes' and properties' definitions.pdf
ISO 23611-6 2012 Soil quality — Sampling of soil invertebrates — Part 6 Guidance for the design of sampling programmes with soil invertebrates.pdf
ISO 23640 2011 In vitro diagnostic medical devices — Evaluation of stability of in vitro diagnostic reagents.pdf
ISO 23788 2012 Metallic materials — Verification of the alignment of fatigue testing machines.pdf
ISO 23833 2013 Microbeam analysis — Electron probe microanalysis (EPMA) — Vocabulary.pdf
ISO 23873 2010 Hard coal — Method for the measurement of the swelling of hard coal using a dilatometer.pdf
ISO 23893-3 2013 Water quality — Biochemical and physiological measurements on fish — Part 3 Determination of vitellogenin.pdf
ISO 23908 2011 Sharps injury protection — Requirements and test methods — Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling.pdf
ISO 23936-2 2011 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2 Elastomers.pdf
ISO 24099 2011 Navigation data delivery structures and protocols.pdf
ISO 24101-2 2010 Intelligent transport systems — Communications access for land mobiles (CALM) — Application management — Part 2 Conformance test.pdf
ISO 24114 2011 Instant coffee — Criteria for authenticity.pdf
ISO 24115 2012 Green coffee — Procedure for calibration of moisture meters — Routine.pdf
ISO 2419 2012 Leather — Physical and mechanical tests — Sample preparation and conditioning.pdf
ISO 2425 2010 Hydrometry — Measurement of liquid flow in open channels under tidal conditions.pdf
ISO 24500 2010 Ergonomics — Accessible design — Auditory signals for consumer products.pdf
ISO 24501 2010 Ergonomics — Accessible design — Sound pressure levels of auditory signals for consumer products.pdf
ISO 24502 2010 Ergonomics — Accessible design — Specification of age-related luminance contrast for coloured light.pdf
ISO 24503 2011 Ergonomics — Accessible design — Tactile dots and bars on consumer products.pdf
ISO 24610-2 2011 Language resource management — Feature structures —.pdf
ISO 24611 2012 Language resource management — Morpho-syntactic annotation framewo.pdf
ISO 24612 2012 Language resource management — Linguistic annotation framework (LAF).pdf
ISO 24614-1 2010 Language resource management — Word segmentation of written texts — Part 1 Basic concepts and general principles.pdf
ISO 24614-2 2011 Language resource management — Word segmentation of written texts — Part 2 Word segmentation for Chinese, Japanese and Korean.pdf
ISO 24616 2012 Language resources management — Multilingual information framework.pdf
ISO 24619 2011 Language resource management — Persistent identification and sustainable access (PISA).pdf
ISO 24631-6 2011 Radiofrequency identification of animals — Part 6 Representation of animal identification information (visual display data transfer).pdf
ISO 24631-7 2012 Radiofrequency identification of animals — Part 7 Synchronization of ISO 11785 identification systems.pdf
ISO 2475 2011 Chloroprene rubber (CR) — General-purpose types — Evaluation procedure.pdf
ISO 251 2012 Conveyor belts with textile carcass — Widths and lengths.pdf
ISO 25139 2011 Stationary source emissions — Manual method for the determination of the methane concentration using gas chromatography.pdf
ISO 25157 2013 Essential oil of rose, Chinese Kushui type (Rosa sertata x Rosa rugosa).pdf
ISO 25178-3 2012 Geometrical product specifications (GPS) — Surface texture Areal — Part 3 Specification operators.pdf
ISO 25178-601 2010 Geometrical product specifications (GPS) — Surface texture Areal — Part 601 Nominal characteristics of contact (stylus) instruments.pdf
ISO 25178-602 2010 Geometrical product specifications (GPS) — Surface texture Areal — Part 602 Nominal characteristics of non-contact (confocal chromatic pro.pdf
ISO 25178-701 2010 Geometrical product specifications (GPS) — Surface texture Areal — Part 701 Calibration and measurement standards for contact (sty.pdf
ISO 25297-1 2012 Optics and photonics — Electronic exchange of optical data — Part 1 NODIF information model.pdf
ISO 2535 2001 Plastics — Unsaturated-polyester resins — Measurement of gel time at ambient temperature.pdf
ISO 25378 2011 Geometrical product specifications (GPS) — Characteristics and conditions — Definitions.pdf
ISO 254 2011 Belt drives — Pulleys — Quality, finish and balance.pdf
ISO 25597 2013 Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution.pdf
ISO 26062 2010 Nuclear technology — Nuclear fuels — Procedures for the measurement of elemental impurities in uranium- and plutonium-based materials by.pdf
ISO 26082-2 2012 Leather — Physical and mechanical test methods for the determination of soiling — Part 2 Tumbling method.pdf
ISO 26142 2010 Hydrogen detection apparatus — Stationary applications.pdf
ISO 26146 2012 Corrosion of metals and alloys — Method for metallographic examination of samples after exposure to high-temperature corrosive environments.pdf
ISO 26203-2 2011 Metallic materials — Tensile testing at high strain rates — Part 2 Servo-hydraulic and other test systems.pdf
ISO 26322-2 2010 Tractors for agriculture and forestry — Safety — Part 2 Narrow-track and small tractors.pdf
ISO 26428-11 2011 Digital cinema (D-cinema) distribution master — Part 11 Additional frame rat.pdf
ISO 26428-19 2011 Digital cinema (D-cinema) distribution master — Part 19 Serial digital interface signal formatting for additional frame rates level AFR2 and level AFR4.pdf
ISO 26462 2010 Milk — Determination of lactose content — Enzymatic method using difference in pH.pdf
ISO 26642 2010 Food products — Determination of the glycaemic index (GI) and recommendation for food classification.pdf
ISO 26683-1 2013 Intelligent transport systems — Freight land conveyance content identification and communication — Part 1 Context, architecture and referenced standards.pdf
ISO 26683-2 2013 Intelligent transport systems — Freight land conveyance content identification and communication — Part 2 Application interface profiles.pdf
ISO 26800 2011 Ergonomics — General approach, principles and concepts.pdf
ISO 26869 2012 Space systems — Small-auxiliary-spacecraft (SASC)-to- launch- vehicle interface control document.pdf
ISO 26945 2011 Metallic and other inorganic coatings — Electrodeposited coatings of tin-cobalt alloy.pdf
ISO 27145-2 2012 Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 2 Common data dictionary.pdf
ISO 27145-3 2012 Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 3 Common message dictionary.pdf
ISO 27185 2012 Cardiac rhythm management devices — Symbols to be used with cardiac rhythm management device labels, and information to be supplied — General requirements.pdf
ISO 2721 2013 Photography — Film-based cameras — Automatic controls of exposure.pdf
ISO 2739 2012 Sintered metal bushings — Determination of radial crushing strength.pdf
ISO 27470 2011 Aircraft ground equipment — Upper deck catering vehicle — Functional requirements.pdf
ISO 27471 2012 Aircraft ground equipment — Upper deck loader — Functional requirements.pdf
ISO 277 2002 Binders for paints and varnishes — Raw tung oil — Requirements and methods of test.pdf
ISO 27729 2012 Information and documentation — International standard name identifier (ISNI).pdf
ISO 27730 2012 Information and documentation — International standard collection identifier (ISCI).pdf
ISO 27871 2011 Cheese and processed cheese — Determination of the nitrogenous fractions.pdf
ISO 27911 2011 Surface chemical analysis — Scanning-probe microscopy — Definition and calibration of the lateral resolution of a near-field optical microscope.pdf
ISO 27955 2010 Road vehicles — Securing of cargo in passenger cars, station wagons and multi-purpose vehicles — Requirements and test methods.pdf
ISO 28005-1 2013 Security management systems for the supply chain — Electronic port clearance (EPC) — Part 1 Message structures.pdf
ISO 2811-2 2011 Paints and varnishes — Determination of density — Part 2 Immersed body (.pdf
ISO 2811-4 2011 Paints and varnishes — Determination of density — Part 4 Pressure cup method.pdf
ISO 28218 2010 Radiation protection — Performance criteria for radiobioassay.pdf
ISO 28278-2 2010 Glass in building — Glass products for structural sealant glazing — Part 2 Assembly rules.pdf
ISO 284 2012 Conveyor belts — Electrical conductivity — Specification and test method.pdf
ISO 28439 2011 Workplace atmospheres — Characterization of ultrafine aerosols nanoaerosols — Determination of the size distribution and number conc.pdf
ISO 28564-1 2010 Public information guidance systems — Part 1 Design principles and element requirements for location plans, maps and diagrams.pdf
ISO 286-2 2010 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2 Tables of standard tolerance classes and limit deviations for holes and shafts.pdf
ISO 28600 2011 Surface chemical analysis — Data transfer format for scanning-probe micros.pdf
ISO 2867 2011 Earth-moving machinery — Access systems.pdf
ISO 28706-5 2010 Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 5 Determination of resistance to chemical corrosion in closed systems.pdf
ISO 28762 2010 Vitreous and porcelain enamels — Enamel coatings applied to steel for writing surfaces — Specification.pdf
ISO 28802 2012 Ergonomics of the physical environment — Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people.pdf
ISO 28803 2012 Ergonomics of the physical environment — Application of International Standards to people with special requirements.pdf
ISO 28901 2011 Soil quality — Guidance for burial of animal carcasses to prevent epidemics.pdf
ISO 28902-1 2012 Air quality — Environmental meteorology — Part 1 Ground-based remote sensing of visual range by lidar.pdf
ISO 28927-10 2011 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 10 Percussive drills, hammers and breakers.pdf
ISO 28927-11 2011 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 11 Stone hammers.pdf
ISO 28927-4 2010 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 4 Straight grinders.pdf
ISO 2896 2001 Rigid cellular plastics — Determination of water absorption.pdf
ISO 29042-9 2011 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 9 Decontamination index.pdf
ISO 2906 2002 Cinematography — Image area produced by camera aperture on 35 mm motion-picture film — Position and dimensions.pdf
ISO 29061-1 2010 Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 1 Vehicles and child restraint systems.pdf
ISO 29201 2012 Water quality — The variability of test results and the uncertainty of measurement of microbiological enumeration methods.pdf
ISO 29262 2011 Production equipment for microsystems — Interface between end effector and handling system.pdf
ISO 29473 2010 Fire tests — Uncertainty of measurements in fire tests.pdf
ISO 29481-2 2012 Building information models — Information delivery manual — Part 2 Interaction framework.pdf
ISO 2954 2012 Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity.pdf
ISO 29541 2010 Solid mineral fuels — Determination of total carbon, hydrogen and nitrogen content — Instrumental method.pdf
ISO 29601 2011 Paints and varnishes — Corrosion protection by protective paint systems — Assessment of porosity in a dry film.pdf
ISO 29661 2012 Reference radiation fields for radiation protection — Definitions and fundamental concepts.pdf
ISO 29664 2010 Plastics — Artificial weathering including acidic deposition.pdf
ISO 29701 2010 Nanotechnologies — Endotoxin test on nanomaterial samples for in vitro systems — Limulus amebocyte lysate (LAL) test.pdf
ISO 2971 2013 Cigarettes and filter rods — Determination of nominal diameter — Method using a non-contact optical measuring apparatus.pdf
ISO 29842 2011 Sensory analysis — Methodology — Balanced incomplete block designs.pdf
ISO 29845 2011 Technical product documentation — Document types.pdf
ISO 29942 2011 Prophylactic dams — Requirements and test methods.pdf
ISO 30002 2012 Ships and marine technology — Ship recycling management systems — Guidelines for selection of ship recyclers (and pro forma contract).pdf
ISO 30006 2010 Ship recycling management systems — Diagrams to show the location of hazardous materials onboard ships.pdf
ISO 30007 2010 Ships and marine technology — Measures to prevent asbestos emission and exposure during ship recycling.pdf
ISO 3034 2011 Corrugated fibreboard — Determination of single sheet thickness.pdf
ISO 3046-5 2001 Reciprocating internal combustion engines — Performance — Part 5 Torsional vibrations.pdf
ISO 3059 2012 Non-destructive testing — Penetrant testing and magnetic particle testing — Viewing conditions.pdf
ISO 3076 2012 Round steel short link chains for general lifting purposes — Medium tolerance sling chains for chain slings — Grade 8.pdf
ISO 3228 2013 Rolling bearings — Cast and pressed housings for insert bearings — Boundary dimensions and tolerances.pdf
ISO 3272-3 2001 Microfilming of technical drawings and other drawing office documents — Part 3 Aperture card for 35 mm microfilm.pdf
ISO 3308 2012 Routine analytical cigarette-smoking machine — Definitions and standard conditions.pdf
ISO 3342 2011 Textile glass — Mats — Determination of tensile breaking force.pdf
ISO 3343 2010 Reinforcement yarns — Determination of twist balance index.pdf
ISO 3394 2012 Packaging — Complete, filled transport packages and unit loads — Dimensions of rigid rectangular packages.pdf
ISO 3434 2012 Ships and marine technology — Heated glass panes for ships' rectangular windows.pdf
ISO 3451-5 2002 Plastics — Determination of ash — Part 5 Poly(vinyl chloride).pdf
ISO 3523 2002 Oil of cananga (Cananga odorata (Lam.) Hook. f. et Thomson, forma macrop.pdf
ISO 3528 2012 Essential oil of mandarin, Italian type (Citrus reticulata Blanco).pdf
ISO 3567 2011 Vacuum gauges — Calibration by direct comparison with a reference gauge.pdf
ISO 3573 2012 Hot-rolled carbon steel sheet of commercial and drawing qualities.pdf
ISO 3574 2012 Cold-reduced carbon steel sheet of commercial and drawing qualities.pdf
ISO 3601-1 2012 Fluid power systems — O-rings — Part 1 Inside diameters, cross-sections, tolerances and designation codes.pdf
ISO 3627 2001 Photography — Processing chemicals — Specifications for anhydrous sodium metabisulfite.pdf
ISO 3632-1 2011 Spices — Saffron (Crocus sativus L.) — Part 1 Specification.pdf
ISO 3632-2 2010 Spices — Saffron (Crocus sativus L.) — Part 2 Test methods.pdf
ISO 3665 2011 Photography — Intra-oral dental radiographic film and film packets — Manufacturer specifications.pdf
ISO 3673-2 2012 Plastics — Epoxy resins — Part 2 Preparation of test specimens and determination of properties of crossli.pdf
ISO 3715-1 2002 Ships and marine technology — Propulsion plants for ships — Part 1 Vocabulary for geometry of propellers.pdf
ISO 3720 2011 Black tea — Definition and basic requirements.pdf
ISO 3727-1 2001 Butter — Determination of moisture, non-fat solids and fat contents — Part 1 Determination of moisture content (Reference method).pdf
ISO 3727-2 2001 Butter — Determination of moisture, non-fat solids and fat contents — Part 2 Determination of non-fat solids content (Reference method).pdf
ISO 3730 2012 Shipbuilding and marine structures — Mooring winches.pdf
ISO 3743-1 2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for small movable sources in reverberant fields.pdf
ISO 3776-2 2013 Tractors and machinery for agriculture — Seat belts — Part 2 Anchorage strength requirements.pdf
ISO 3781 2011 Paper and board — Determination of tensile strength after immersion in wat.pdf
ISO 3832 2002 Passenger cars — Luggage compartments — Method of measuring reference volume.pdf